You asked: What kind of transmission fluid does a 2001 f250 take?

The type of transmission fluid the 2001 Ford F-250 uses is Dexron and Mercon. The transmission is one of the most critical parts of the vehicle.

What type of transmission fluid does a f250 take?

Oil Type: Dexron VI.

What transmission fluid does a 7.3 take?

7.3L Power Stroke Oil/Fluid Specs & Capacities

Oil & Fluid Specs
Engine oil 15W-40
Automatic transmission fluid MERCON V full synthetic ATF (replaces defunct MERCON spec, 4R100 & E4OD transmissions)
Manual transmission fluid ZF S5-42/S5-47 (5 spd)
ZF S6-650 (6 spd)

What kind of fluid goes in a Ford transmission?

Dexron III/Mercon – This is one of the most common fluids on the market. Most GM and Ford units call for this type of ATF, as well as many imports. If your owners manual recommends any form of Dexron, or any Mercon – other than Mercon V – this is the fluid you want.

How many quarts of transmission fluid does a Ford f250 Super Duty take?

When equipped with an automatic transmission, the Ford F-250 requires 17.6 quarts of transmission fluid or 11.7 quarts with a manual transmission.

IT IS INTERESTING:  Can my plastic bumper be repaired?

What kind of transmission fluid does a 2000 f250 take?

Mobil 1 Synthetic Transmission Fluid Dexron/Mercon 1 Quart.

What kind of transmission fluid does a 2008 Ford f250 take?

The type of transmission fluid the 2008 Ford F-250 5 4 uses is Dexron VI. The transmission is one of the most critical parts of the vehicle.

What transmission fluid does a E4OD take?

Ford E4OD Transmission Specs

Transmission: Ford E4OD
ATF Type/Spec: Ford MERCON V automatic transmission fluid
Transmission Filter P/N: 2WD applications Motorcraft FT-113
4WD applications Motorcraft FT-114
Fluid Capacity: ~ 17 – 18 quarts

How many gallons does a 7.3 hold?

It appears the 7.3l with the regular cab and super cab have the 34 gallon tank. The 7.3l crew cab super duty has a 48 gallon tank! Check out the 2020 Super Duty Specs sheet I attached.

Is Mercon V the same as Mercon LV?

Over the years, the original Mercon was supplanted by Mercon “V”, Mercon “SP”, Mercon LV, and Mercon ULV which is the latest fluid.

What can be used in place of transmission fluid?

Any light weight quality engine oil or hydraulic fluid will work 5 to 10 single weight or multi weigh 5W-30, 10w 30. Yes.

What is Mercon LV compatible with?

Formulated to meet the demands of most modern transmissions on the road today, Advantage® Uni-Syn LV DEXRON® VI/MERCON® LV ATF is also backward compatible with older GM Dexron specifications making it the perfect premium product to streamline your transmission fluid offerings.

How many quarts of transmission fluid do I need?

In general, transmissions take about 9 to 13 quarts to fill completely. The amount of transmission you add will vary, depending on whether you are draining or replacing it all or you are just topping it up. Again, you should avoid adding too much. It is advisable to put in little amounts at a time.

IT IS INTERESTING:  What is the three phase motor?
Blog about car repair