How do you remove a shift cable from a transmission?

Use a 9/16-inch wrench to loosen the nut on the shifter cable under the vehicle, turning the nut counter clock wise. Slide the cable out and off the shift lever on the side of the transmission.

How hard is it to replace a shift cable?

It’s relatively easy to replace broken shift cables on a vehicle. … When this cable breaks, or the mounts snap from excess pressure, the shifter is rendered inoperable, and your vehicle will not switch gears as normal.

Where is the transmission cable located?

The shift selector cable connects the gear shifter, located on the steering column or on a floor mounted console, to the automatic transmission. The cable is typically steel and is protected from the elements by a plastic outer sheath.

When should shifter cables be replaced?

Registered. 5000 to 6000 miles is a good time frame to replace the cables. Other wise wait till they brake and either have a good stiff pedal in or nice easy spin, depending on the broken cable.

What happens when the shifter cable breaks?

If a shifter cable breaks or bends, it is not able to move the shifter lever on the transmission into the correct position for the right gear. If forced, the driver will cause accelerated wear of the shifter cable. Both automatic and manual transmission vehicles have the same symptoms when the shifter cable is failing.

IT IS INTERESTING:  How long is it safe to charge a car battery?

Is the shifter cable part of the transmission?

The shift selector cable puts the transmission into the proper gear, which is indicated by the shift selector that it has been moved by the driver. Automatic transmission vehicles normally have one cable that runs from the transmission to the shifter assembly, while manual transmission vehicles have two.

How much does it cost to replace a shifter cable?

The average cost for automatic trans shift cable replacement is between $291 and $335. Labor costs are estimated between $165 and $209 while parts are priced at $126. This range does not include taxes and fees, and does not factor in your specific vehicle or unique location. Related repairs may also be needed.

How does a shift cable work?

The shift cable runs up through the firewall and attaches to this lever. The cable runs from the firewall to the transmission gear shift linkage, where it is attached and held securely in place. As the handle is moved, it either pulls or pushes on the cable. In turn, the cable does the same to the transmission linkage.

What would cause an automatic transmission not to shift?

One main reason why the automatic transmission in your car may not be shifting smoothly is the ECM is going bad. It is best to get this checked out by an experienced auto mechanic technician who understands the electrical system. Other indicators include bad connections within, or worn out sensors and faulty solenoids.

Blog about car repair