How do I know if I have a c6 transmission?

Look for a seam between the bell housing and the body of the transmission. If no seam exists, the transmission is a C6. If a seam does exist, it will be necessary to inspect the oil pan to determine whether the transmission is a C3 or a C4.

How do I identify my Ford transmission?

How to Identify Ford Transmissions

  1. Take a picture of the transmission. …
  2. Measure the distance from the bellhousing to the rear of the transmission.
  3. Look at the transmission pan and note the shape and the number of bolts. …
  4. Find the year of the vehicle the transmission came from.

What vehicle has a C6 transmission?

The Ford C6 is a heavy-duty automatic transmission built by Ford Motor Company between 1966 and 1996. It was marketed as the “SelectShift Cruise-O-Matic”.

Ford C6 transmission.

C-6 “Selectshift Cruise-O-Matic”
Overview
Production 1966–2004
Body and chassis
Class 3-speed longitudinal automatic transmission

How do I know if my C6 has a small block transmission?

Therefore, knowing how to identify the C6 is vital.

  1. Count the number of bolts which hold the transmission’s oil pan to the transmission. …
  2. Locate the drain plug. …
  3. Determine whether the transmission’s bell housing can be detached from the transfer case. …
  4. Locate the speedometer driver gear. …
  5. Locate the control levers.
IT IS INTERESTING:  Does a new battery give a car more power?

What year is my C6 transmission?

The surest way to identify where a C6 transmission came from is the ID tag, which is located on the servo housing just behind the external transmission shift lever.

Where is the transmission number located?

The transmission number will be on the side of the transmission, or on the top of the transmission (manual and automatic respectively).

Which transmission is better C4 or C6?

The C4 transmission was primarily used in cars. The C6 transmission could handle more power. Due to the ability to handle more power, the C6 transmission was used in many Ford trucks with bigger engines, and in larger cars that were manufactured with bigger engines.

Is a C6 transmission good?

The C6 is the strongest, most durable light duty automatic Ford has made. It was designed in the 60’s during the horsepower wars. The E4OD / 4R100 is not necessarily a “crap” transmission, it is based on the C6.

Will a C6 transmission bolt a 302?

A c6 will fit but you need one with the smallblock bellhousing pattern FE pattern is different. A 302 should do fine put a mild cam in it a 4 bbl intake and a good set of headers.

How does a C6 transmission shift?

The transmission will shift through the gears, but will not downshift back to low gear when coming to a stop. … There is a delayed transmission engagement or it will not engage forward or in reverse. • The transmission slips in forward and reverse and a whining noise comes from the front pump or torque converter area.

IT IS INTERESTING:  Quick Answer: Do you need an ESC for a brushless motor?

What engines bolt to a C6 transmission?

The 351m, 400, 429, 460 all bolt up to the C6 transmission without any adapters. But if you want a 429 or a 460 you need a kit for it to be able to fit into the engine bay without problems such as control arms, steering, exhaust, motor mounts, etc.

How many bolts does a C6 transmission have?

The C6 was produced with four basic bellhousing bolt patterns over its long production life and is a very rugged transmission designed for high-power applications. The round six-bolt pattern is for FE-series big-blocks such as the 332, 352, 361, 360, 390, 406, 427, and 428 engines.

Blog about car repair