|Chevrolet Impala Police Vehicle:||302 hp (225kW) @ 6800 SAE Certified|
|Chevrolet Impala:||300 hp (224kW) @ 6500 SAE Certified|
|Chevrolet Equinox:||301 hp (225kW) @ 6500 SAE Certified|
|Cadillac CTS Coupe, Sedan and Wagon:||318 hp (237kW) @ 6800 SAE Certified|
What GM car had a 3.0 engine?
GM 3.0 Liter V6 LFW Engine
|Cadillac CTS Wagon:||270 hp (201 kW) @ 7000 rpm SAE CERTIFIED|
|Chevrolet Captiva:||265 hp (198 kW) @ 6950 rpm SAE CERTIFIED|
|Applications||Torque lb.-ft. (Nm)|
|Cadillac CTS (dual exhaust):||223 lb.-ft (302 Nm) @ 5700 rpm SAE CERTIFIED|
What cars have a 3.6 L V6 engine?
The Wrangler JL and Gladiator, plus the Chrysler minivans, Durango, and Grand Cherokee use the updated version of the 3.6 that was released in 2016.
- Chrysler 300.
- Chrysler Pacifica.
- Chrysler Voyager.
- Dodge Challenger.
- Dodge Charger.
- Dodge Durango.
- Jeep Gladiator.
- Jeep Grand Cherokee.
Is 300 hp a lot?
300hp, or horsepower, is not considerably significant. However, It’s plenty of power for most applications! For a sports car, 300hp is a great benchmark, showing that a car will be lots of fun. This means the engine is serious about performance, and likely consumes lots of fuel.
Is the Cadillac 3.0 engine a good engine?
Acceleration and Power. The base engine in the 2012 Cadillac CTS sedan is a 3.0-liter V6 that makes 270 horsepower. Reviewers say it offers good passing power and plenty of punch. However, reviewers say it feels sluggish when compared with the 3.6-liter, 318-horsepower V6 engine found in higher trim levels.
How much horsepower does a 3.0 liter boat engine have?
Mercruisers are inboard marine engines that are produced by Mercury Marine. Mercruisers were first introduced at the 1961 Chicago Boat Show and were the first inboard marine engines that offered over 100 horsepower. The 3.0 liter Mercruiser MPI is an inboard engine capable of producing 135 horsepower.
How much horsepower does a 3.6 liter engine have?
The 3.6 liter Pentastar engine is rated at 305 horsepower and 270 lb. -ft. of torque in the Dodge Challenger; 90% of torque is available from 1,800 to 6,350 rpm, real-world punch.
Is the 3.6 VVT a good engine?
Short answer – yes. The FCA 3.6L Pentastar engine is reliable. We’ll give the Pentastar above average marks for reliability. Again, there is a reason this engine is powering so many flagship vehicles from Dodge, Jeep, Chrysler, and Ram; the same reason it’s been around for a decade.
Is the 3.8 V6 a good engine?
The 3.8 liter V6 was a conservatively designed, wider-bore, longer-stroke version of the then-new 3.3-liter V6. It was a good, solid engine from the start – not the highest performer or the lowest, but relatively quiet, driveable, and reliable.
|Fuel ||Regular (US: 87 octane)|
Is the 5.7 Hemi a good engine?
Is The 5.7 Hemi A Good Engine? Overall, the 5.7 Hemi is an outstanding engine. It has earned a reputation as a reliable and sturdy workhorse of an engine. If you talk to anyone that owns a vehicle with a 5.7 Hemi engine, they will likely have very few, if any, bad things to say about it.