You’ll need a pot of very hot water and a simple plunger. Pour the hot water over the dented surface of the car. This softens the material. Put the plunger over the indented area and pull straight out.
Does boiling water remove dents in cars?
If you have a dent in your car’s or truck’s bumper, you can remove it and apply boiling water to make it easier to push the dent out of the plastic. Just heat boiling water and pour it over the affected area. … The plastic should be soft because it is warmed up and will be able to release the dent more easily.
Does boiling water remove dents in metal?
Before applying tools, try the following: wash the dented surface with hot, possibly boiling water. With a bit of luck the metal will flex and pop back in its original form. This also works on plastic bumpers. The hot water always supplies sufficient heat to make the paint and the material smooth.
Are dent pullers any good?
Dent pullers only work on shallow dents on flat, flexible surfaces. They can improve the appearance of dents but probably won’t create a perfect finish. But these tools will not work on deep, angular dents or damage along the edges of bodywork.
How do body shops fix dents?
To ensure that doesn’t happen, body shops use a process called “paintless dent removal” (PDR). PDR requires no fillers or sanding, as a trained technician uses a variety of special tools to gently and slowly push dents back into place without harming the factory paint job.
Can you pour boiling water on car paint?
While it does work on metal, parts like side mirrors, lights, and wheels will not work. Pouring hot water over metal also has its problems. It could warp the metal out of shape, make it less sturdy; it could even ruin your paint job if your paint isn’t up to par.
How do you hammer out dents in metal?
How to Bang Out a Dent
- Use a body hammer to lightly tap around the outer edges of the dent. …
- Find a way to reach the other side of the dent. …
- Place a metal dolly on the dented side of the metal. …
- Move the dolly and hammer around on the dent, banging the dent from both sides, until it is smooth.