This type of drive train fluid should not be used in automatics that require Type F. It can be replaced with Mercon or Mercon V specification.
What transmission fluid is compatible with Type F?
Mobil Type F ATF is recommended by ExxonMobil for use in applications requiring Type F fluid as follows: Automatic transmissions in certain older Toyota, Mazda, Volvo, and other imported vehicles that require an ESW-M2C33-F fluid. In addition, this type of ATF is specified for some Ford power steering systems.
Can you use dexron in place of Type F?
RAY: If you put Dexron, Mercon or Chrysler 7176 transmission fluid in just about any transmission, it will perform just fine. … And in transmissions that are not designed for it, Type F fluid will cause rough shifts, and can even cause damage by making the torque converter engage before it should.
Can you use Mercon in place of Type F?
Mercon—introduced in 1987 and similar to Dexron II. Ford ceased licensing Mercon in 2007 and now recommends Mercon V for all transmissions that previously used Mercon. Mercon is a suitable replacement for Type H and Type CJ fluid, but not for Type F. … It is not compatible with any other fluid, either.
Is ATF and type f the same?
General Motors referred to its ATF as Dexron II and Ford’s specified fluid was labeled Mercon. Ford first produced its own ATF in 1967 and referred to as Type F. The name comes from Ford’s specification number for the fluid, ESW M2C33-F.
What is the difference between Type F and Dexron transmission fluid?
What is the difference between DEXRON® III/MERCON® and type F transmission fluid? The Valvoline Type F transmission fluid is a high quality NON-friction modified fluid. DEXRON® III/MERCON includes friction modifiers in the fluid additive package.
Is Dexron and mercon the same?
Dexron III and Mercon V are similar types of automatic transmission fluid, with the main difference being that Dexron is the formula developed by General Motors, while Mercon was created by Ford. … However, Mercon LV and Mercon V are not compatible, so any Ford vehicle manufactured before 2008 requires Mercon V.
Is Synthetic ATF better?
Synthetic transmission fluid is made to last longer than conventional types, so you can go longer between fluid changes without sacrificing quality lubrication. However, synthetic oil costs more, so we recommend you do the math to see which type of transmission fluid will cost you less over the life of your vehicle.
Can you use Type F transmission fluid in a Chevy?
Type “F” fluid is a heaver viscosity. Stands more heat also. Just the installation of type “F” fluid will have a firmer shift. You can not use it in a any of the GM overdrive transmissions.
What is Mercon LV compatible with?
Formulated to meet the demands of most modern transmissions on the road today, Advantage® Uni-Syn LV DEXRON® VI/MERCON® LV ATF is also backward compatible with older GM Dexron specifications making it the perfect premium product to streamline your transmission fluid offerings.
Is Mercon the same as Mercon V?
Over the years, the original Mercon was supplanted by Mercon “V”, Mercon “SP”, Mercon LV, and Mercon ULV which is the latest fluid. Ford has upgraded the Mercon specifications over the years; the newer fluids are not always backward compatible with previous fluids.
What is the difference between ATF 3 and ATF 4?
Graphs in the paper show that the friction coefficient of fresh ATF+3 and ATF+4 is essentially identical, but as the fluid ages ATF+4 retains the “as new” coefficient while ATF+3 degrades.