Do they still make the 3800 engine?

Chevrolet had two types of 3.8-liter V-6 engines: the 3.8-liter Buick V-6 and the short-lived Chevrolet 3.8-liter version. The venerable and immensely popular Buick V-6 survives today as the GM 3800 and serves as the base engine for many Chevy cars.

Why did they stop making the 3800 engine?

GM couldn’t get consistent quality from the difficult-to-cast aluminum blocks, so it dropped the engine after just two years. But the basic design and technology were resurrected for an iron block, a 198-cubic-inch V-6.

Does GM still make 3.8 engine?

General Motors’ ubiquitous 3.8-liter V-6 is soon to become extinct. For ’09, it is replaced by GM’s (more) modern 3.9-liter V-6 in the Buick Lucerne, leaving it barely hanging on in the Buick LaCrosse and Pontiac Grand Prix, which share a platform.

Is the Buick 3.8 a good engine?

The 3.8 is a great engine but it is not quite smooth enough for where Buick is going as the leader in NVH. The HFV6 is also a great engine.

What cars had 3800 engines?

The GM 3800, 3.8-liter V-6 came in the Chevrolet Monte Carlo, Malibu, El Camino, Impala, Monza, Caprice, Camaro and Lumina. Chevrolet replaced the Buick version with another 3.8-liter V-6 version, based on the Chevrolet 305 V-8, from 1980 to 1985.

IT IS INTERESTING:  Do Mercedes use Renault engines?

Is a Grand Prix a muscle car?

An incredibly rare, and shockingly powerful muscle car, the Grand Prix Super Duty today is worth well into the 6-figures.

Is the 3.9 gm a good engine?

A standard VVT 3.9 is a great engine. Can’t go wrong with any of the gen 3 3800 engine family. If you can find one with the 3.8 i would by it. We have not seen any real issues in our shop with 3.9,but the 3.8 was bullet proof.

How much HP does a 3.8 supercharged have?

The supercharged 3800 Series III, found in the Grand Prix GT or GTP (depending on model year), unleashed 260 horsepower. The 3800 and 3800 SC Supercharged engines offered 230 foot-pounds of torque at 4,000 RPM and 380 foot-pounds of torque at 5,200 RPM, respectively.

How much horsepower does a 3800 supercharged engine have?

The supercharged 3800 Series III, found in the Grand Prix GT or GTP (depending on model year), unleashed 260 horsepower. The 3800 and 3800 SC Supercharged engines offered 230 foot-pounds of torque at 4,000 RPM and 380 foot-pounds of torque at 5,200 RPM, respectively.

How much HP does a 3.8 v6 have?

In box stock form, the 3.8L Essex V-6 produces 145-150 hp at the crankshaft. According to Super Six Motorsports, that’s 0.625 hp per cubic inch or 38.2 hp per liter.

What cars have a 3.8 v6 TT?

Cars

  • 1993 Nissan 240SX SE.
  • 2010 Nissan 370Z.
  • 1970 Nissan Datsun 510.
  • 1969 Nissan Fairlady Z 432.
  • 1998 Nissan R390.
  • 2000 Nissan Silvia Spec-R.
  • 1971 Nissan Skyline 2000GT-R.
  • 2002 Nissan Skyline GT-R V-Spec II.
IT IS INTERESTING:  How do you drive with a hot engine?

What is the most reliable engine ever made?

So who makes the most reliable engines? Perhaps not surprisingly, it’s the Japanese, with the top spot taken by Honda. Only one in every 344 Honda owners have had engine trouble, with second-placed rival Toyota notching up just one in 171.

How reliable is the 3800 engine?

The’re pretty reliable. I’ve had a few with intake gasket issues, and on the newer ones with the plastic intake manifolds I’ve had cases where the manifold itself was damaged. Also had a few with cracked EGR tubes, and most of them leak oil. The motor itself is pretty bullet proof though.

How many miles will a 3.8 last?

If its Mopar, it will last. They last 28,623 miles.

Blog about car repair